IntelliTrack Inventory Management - Manual (Page 35)

Chapter 2
DMS CE Batch Setup
9
Batch Installation Prerequisites by Operating
System
The steps for completing the IntelliTrack DMS Batch Application prereq-
uisites differ by operating system. Please refer to the steps for the operating
system that your computer uses:
• Windows Vista/Windows 7: please see “Batch Installation Prerequi-
sites for Windows Vista and Windows 7” on page 9 .
• Windows Server 2008: please see “Batch Installation Prerequisites for
Windows Server 2008” on page 13 .
• Windows XP/Windows Server 2003: please see “Batch Installation
Prerequisites for Windows XP/Windows Server 2003” on page 14 .
• Windows Server 2003: please see “Windows Server 2003 Requirement
AFTER DMS Installation” on page 15 .
Batch
Installation
Prerequisites
for Windows
Vista and
Windows 7 If you are using Windows Vista or Windows 7, follow these basic steps for
batch installation preparation:
1. Windows Vista uses Internet Information Services (IIS) v7.0. To use
IIS v7 for workstation-batch database communication, certain settings
must be turned on PRIOR to IntelliTrack DMS installation on the
device. This includes: Turning On IIS, Turning On IIS Web Manage-
ment Tools, and Turning On IIS World Wide Web Services. Please refer
to
“Required IIS Settings for Windows 7 and Windows Vista” on page 11
for more information.
2. Familiarize yourself with the RDA components. Please refer to
“Remote Data Access (RDA) Components” on page 17 for more infor-
mation.
3. Windows Vista and Windows 7 use Windows Mobile Device Center
Software for PC-device data synchronization. You must set up a Win-
dows Mobile Partnership between the PC and the device. Please refer
to
“Using Mobile Device Center Software” on page 29 , “Required
WMDC Work Network Connection Setting” on page 30 , and “Setting Up
a Windows Mobile Partnership” on page 30 for more information.
4. IntelliTrack DMS uses Remote Data Access for workstation-batch
database communication. IntelliTrack supports manual and automatic
IIS setup. You must determine your setup option and go through the
RDA setup configuration steps before installing IntelliTrack DMS.
Please refer to
“Remote Data Access (RDA) Components” on page 17
for more information.
2287.book Page 9 Thursday, July 7, 2011 4:45 PM