IntelliTrack WMS – Warehouse Management System User Manual
Page 179
Chapter 7
Inventory Management
153
•
When you are finished reviewing the information about the inven-
tory included in the move, close the form by clicking the Close but-
ton. You are returned to the Mass Move form. If you wish to
continue with the mass move, do not change any settings in the
Move From section of the form. Next, select where you are going to
move this inventory.
6.
If the multiple sites feature is enabled, click the drop-down arrow in the
Site field in the Move To section of the form. Select the Site to which
you are moving the item from the drop-down menu list that appears.
7.
In the Move To section of the form, click the drop-down arrow in the
Location field, and select the location to which you are moving the
items from the drop-down menu list that appears.
If you select a quarantine location, the system will prompt you with a
dialog box, notifying you that this is a quarantine location. If you still
wish to select this location, choose Yes to close the dialog box and con-
tinue. If you do not want to select this location, choose No to close the
dialog box and choose another location.
8.
Click the Do It button found along the bottom of the form to process
the inventory move and clear the form. (Click the Cancel button found
along the bottom of the form to close the form and cancel moving the
items.) Select the Close button found along the bottom of the form to
process the move and exit the form.