Establishing zones – IntelliTrack WMS – Warehouse Management System User Manual
Page 232
I
NTELLI
T
RACK
WMS: W
AREHOUSE
M
ANAGEMENT
S
YSTEM
V
8.1
User Manual
206
Establishing Zones
Important: The Zone feature is only available with the RF Professional
version. If you are using RF Standard or WMS Batch, this feature is not
available for your WMS. In order to add zones to WMS, you must enable
the zone feature in the System Options form\Features tab.
In WMS RF Professional, zones are implemented during the picking order
process with the RF portable application. When a picking zone is assigned
in the RF portable application, only inventory from the locations in the
assigned zone are available for picking. Zones are added, edited and
deleted in the workstation application at the Zones form.
Warning: When entering data in the application, DO NOT USE special
characters or quotes with the exception of dashes, dots, and spaces. Except
for dashes, dots, and spaces, if you use special characters or quotes when
entering data in the application, the database will become corrupted. For
more information, please refer to
“Precautions When Entering Data” on
.