IntelliTrack WMS – Warehouse Management System - Manual (Page 212)

I NTELLI T RACK WMS: W AREHOUSE M ANAGEMENT S YSTEM V 8.1
User Manual
186
10. Click the drop-down arrow in the Item # field and select the item # for
the new picking order. Next, press the <Tab> key to advance to the
Ordered field.
11. In the Ordered field, enter the total item quantity of this pick order.
(This amount may be higher then the on hand quantity of the item if
you are placing the pick order against an anticipated receiving order.)
Next, press the <Tab> key to advance to the New Pick field.
12. In the New Pick field, enter the amount of the item to be picked at this
time.
Note: The item must be entered into inventory in order to be picked. If you
attempt to pick an order from a location without enough inventory, you will
need to adjust the inventory in this location, or decrease the pick amount.
13. Repeat steps 10-12 until all of the order’s items have been entered.
14. When you are finished, select the Do It button found along the bottom
of the form to process the new order. (To cancel the new order, click the
Cancel button.)
15. Click the Close button to exit the form.
Reviewing Picking Orders
After the order is added at the New Picking Order form, the order may be
viewed at the Review Picking Order form. Order information cannot be
added, edited, or deleted from this form. To review a picking order: select
Manage > Picking Orders > Review Order Selection from the ribbon.
The Review Picking order form appears: