IntelliTrack WMS – Warehouse Management System - Manual (Page 183)

Chapter 7
Inventory Management
157
tinue. If you do not want to select this location, choose No to close the
dialog box and choose another location.
9. In the Assign Pallet # section of the form, click on the New Pallet #
button to automatically assign a new pallet number (the system will
automatically assign the pallet number based upon the next pallet num-
ber entered in the Next Pallet field in the System Options form/Fea-
tures tab);
—Or—
Click the drop-down arrow in the Select Pallet field and assign an
existing pallet number from the drop-down menu list that appears.
Once a pallet # is assigned, it is displayed in the Pallet field, which
resides beneath the Select Pallet field. (The Pallet field is not editable.)
10. Next, enter the quantity that is moving to the pallet in the Qty to Move
field. (If you want to move the total quantity available, click the Select
All button to fill the Quantity to Move field with the total quantity.)
11. Click the Do It button found along the bottom of the form to process
the entries.
(Clicking the Cancel button found along the bottom of the form will
cancel the entries.)
12. When you are finished at this form, click the Close button found along
the bottom of the form to exit the form.
Moving a Pallet
Note: The Move Pallet menu selection in the ribbon is disabled if the Pal-
let Option is not selected in the System Options form/Features tab. The
pallet option is available with the WMS RF Standard and Professional ver-
sions.