IntelliTrack WMS – Warehouse Management System - Manual (Page 253)

Chapter 10
Import and Export Utility
227
2. Set a time interval for automatically communicating with the Host
Receiving system by entering an amount of time in the Interval field,
and then selecting the radio button next to the desired time parameter
(Hours, Minutes, or Seconds). Communication with the host system
will occur automatically at this interval. Entering zero (0) in the Inter-
val field discontinues the service.
3. Select the ellipsis (...) button in the Export filename field. The Open
window appears. Navigate to the export file location to enter it in the
Export filename field. Or, manually enter the export file name and
location in the Export filename field. (By default the file will be
exported to your Program Files\IntelliTrack\WMS\Util-
ity\Export folder.) The exported file is a text file.
4. Next, click the Fixed Width or Tab Delimited radio button to select
the file type.
If the file is a fixed width file, you must enter the file length for each
field in the Length field of the template grid.
5. Select the Do It button to process the Host Receiving export. If the
export does not operate successfully, you will receive an Error log.
6. Select the Preview/View button found along the bottom of the form to
view the exported file.
Exporting and Importing Inventory Data
Inventory data may be exported from IntelliTrack WMS or imported into
IntelliTrack WMS through the Import Export Utility. For more information
about exporting and importing inventory data, please refer to the following
sections.
Exporting
Inventory Data
Inventory data is exported from WMS to the specified file based on the
configuration settings, the data filtering that is applied, and the selected
field name position. To export inventory data:
1. Click the drop-down arrow in the Interface field and select Inventory
Export from the list that appears: