Allied Telesis AT-DC2552XS - Manual (Page 121)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section I: Switch Management 121
Example
This example displays information about switch:
awplus# show system
Current boot config Indicates the name of the configuration file
used by the switch when the switch is reset or
power cycled. The configuration file that is
used by the switch when the switch is reset or
power cycled is called a startup-config file.
Territory N/A
System name Indicates the name of the system set in the
sysName in the Management Information Base
(MIB)-II.
System contact Indicates the contact information for the system
set in the sysContact in the MIB-II.
System Location Indicates the location of the system set in the
sysLocation in the MIB-II.
Table 14. SHOW SYSTEM Command (Continued)
Field Description