Allied Telesis AT-DC2552XS - Manual (Page 315)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section II: Layer 2 Switching 315
The fields are described in Table 55:
Example
The following example displays all the tagged and untagged VLANs on the
switch:
awplus# show vlan
Table 55. SHOW VLAN Command
Parameter Description
VLAN ID Indicates the ID of the VLAN.
Name Indicates the name of the VLAN.
Type Displays the VLAN type. The switch currently
supports only static VLANs.
State Indicates the states of the VLAN. The options are:
 Active: The VLAN has at least one tagged or
untagged port.
 Inactive: The VLAN does not have any ports.
Member Ports Lists the VLAN member ports where (u) indicates
that a port is untagged and (t) indicates that a port
is tagged.