Allied Telesis AT-DC2552XS - Manual (Page 300)

Chapter 12: LACP Commands
300 Section II: Layer 2 Switching
SHOW STATIC-CHANNEL-GROUP
Syntax
show static-channel-group
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display information about static trunk groups on the
switch. See Figure 56 for an example of the command output.
Figure 56. SHOW STATIC-CHANNEL-GROUP Command
% Static Aggregator: : sa1
% Load-Balancing
: IPBoth
% Member:
port1.0.1
port1.0.2
port1.0.3
port1.0.4
% Static Aggregator : sa2
% Load-Balancing : MACBoth
% Member
port1.0.5
port1.0.6
port1.0.7
port1.0.8
% Static Aggregator : sa3
% Load-Balancing : MACBoth
% Member:
port1.0.9
port1.0.10
port1.0.11
port1.0.12
port1.0.13
port1.0.14
port1.0.15
port1.0.16