Allied Telesis AT-DC2552XS - Manual (Page 123)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section I: Switch Management 123
The fields are described in Table 15.
Example
This example displays information about the switch, PSUs, and fan
modules:
awplus# show system environment
Table 15. SHOW SYSTEM ENVIRONMENT Command
Field Description
Overall Status Indicates the status of the unit. The status is either
“Normal” or “***Fault***.”
Resource ID Indicates the ID of the module.
Name Indicates the name of the module. The module
names are:
 AT-DC2552XS- Indicates the switch.
 AT-PWR06 - Indicates the power supply unit.
 FAN Tray 01 or 02 - Indicates a fan module.
ID Indicates the ID of the sensor.
Sensor (Units) Indicates the name of the sensor.
Reading Shows the value that the sensor detected.
Low Limit Displays the specified maximum temperature.
When no value is set, “-” is displayed.
High Limit Displays the specified minimum temperature. When
no value is set, “-” is displayed.
Status Indicates the status of the sensor. The options are:
 Ok
 fault