Allied Telesis AT-DC2552XS - Manual (Page 516)

Chapter 21: Quality of Service (QoS) Commands
516 Section V: Security and Traffic Control
The fields are described in Table 81.
Table 81. SHOW POLICY-MAP Command Description
Field Description
POLICY-MAP-NAME Displays the name of the policy map set by the
POLICY-MAP command.
State Displays if the policy map is assigned to a port.
The options are:
 attached: Indicates a policy map is
assigned to a port.
 detached: Indicates a policy map is not
assigned to a port.
Port assignment is specified using the
SERVICE-POLICY INPUT command.
Description Displays the description of the policy map set
with the DESCRIPTION command.
Default class-map
action Displays the action of the default class map set
with the DEFAULT-ACTION command.
CLASS-MAP-NAME Displays the name of a class map assigned to
the policy map. Class map assignment is
specified with the CLASS command.
Match vlan Displays the VID set by the MATCH VLAN
command.
Match IP DSCP Displays the value of DSCP set by the MATCH
DSCP command.
Match IP precedence Displays the value of IP precedence set by the
MATCH IP-PRECEDENCE command.
Match CoS Displays the CoS value set by the MATCH CoS
command.
Match TCP Flags Displays the settings of TCP flags set by the
MATCH TCP FLAGS command.
Match Mac Type Displays the MAC address type set by the
MATCH MAC-TYPE command.
Match Eth Format /
Match protocol Displays the settings set by the MATCH ETH-
FORMAT PROTOCOL command.