Allied Telesis AT-DC2552XS - Manual (Page 414)

Chapter 17: IPv4 Management Address Commands
414 Section III: IPv4 Management
Example
This example displays the IP routing table on the switch:
awplus# show ip route
Protocol Indicates the source of the routing information. The
options are:
 INTERFACE: The route is based on the IP
address that is assigned statically to the
interface.
 STATIC: The route is assigned statically.
 DHCP: The route is based on the IP address or
default gateway address that is assigned by a
DHCP server.
Table 69. SHOW IP ROUTE Command (Continued)
Field Description