Allied Telesis AT-DC2552XS User Manual
Page 163
AT-DC2552SX Switch Command Line Interface User’s Guide
163
–
error: Specifies the error level of event messages that the
switch sends to the destination. Error is defined as level
number 3.
–
warning: Specifies the warning level of event messages that
the switch sends to the destination. Warning is defined as
level number 4.
–
notice: Specifies the notice level of event messages that the
switch sends to the destination. Notice is defined as level
number 5.
–
informational: Specifies the informational level of event
messages that the switch sends to the destination.
Informational is defined as level number 6.
–
debugging: Specifies the debugging level of event messages
that the switch sends to the destination. Debugging is defined
as level number 7.
program_name
Specifies the name of the program that generates event messages
that you want the switch to send to the destination. If you do not
specify a program name, the switch sends the messages that all
the programs generate to the destination. Use the SHOW LOG and
SHOW LOG PERMANENT commands to list the program names
that you can specify. See “SHOW LOG” on page 170 and “SHOW
LOG PERMANENT” on page 175.
text_string
Specifies the text that the switch filters event message with. The
textline is case-sensitive and can be up to 255 alphanumeric
characters including spaces. Exclamation marks (!) and question
marks (?) are not permitted.
Mode
Global Configuration mode
Description
Use this command to specify filtering criteria to the specified destination.
You can filter messages based on level, program, message text, or a
combination of these parameters.
To remove filtering criteria from the destination, use the NO LOG (FILTER)
command.
Confirmation Command