Allied Telesis AT-DC2552XS - Manual (Page 514)

Chapter 21: Quality of Service (QoS) Commands
514 Section V: Security and Traffic Control
Examples
This example displays the settings of the class map called “cmap1”:
awplus# show class-map cmap1
This example displays the settings of all the class maps defined on the
switch”:
awplus# show class-map
Match IP precedence Displays the value of IP precedence set by
the MATCH IP-PRECEDENCE command.
Match CoS Displays the CoS value set by the MATCH
CoS command.
Match TCP Flags Displays the settings of TCP flags set by the
MATCH TCP FLAGS command.
Match Mac Type Displays the MAC address type set by the
MATCH MAC-TYPE command.
Match Eth Format /
Match protocol Displays the settings set by the MATCH ETH-
FORMAT PROTOCOL command.
Table 80. SHOW CLASS-MAP Command (Continued)
Field Description