Allied Telesis AT-DC2552XS - Manual (Page 78)

Chapter 3: Basic Command Line Management Commands
78 Section I: Switch Management
DO
Syntax
do command
Parameter
command
Specifies the command to perform in the Privileged Exec mode.
Mode
Global Configuration mode and modes below the Global Configuration
mode
Description
Use this command to perform Privileged Exec mode commands from the
Global Configuration mode, or modes below the Global Configuration
mode, such as, the Line, Port Interface, VLAN Configuration modes. You
may use the command to perform some, but not all, of the Privileged Exec
mode commands.
Examples
This example performs the SHOW INTERFACE command for port 1.0.4
from the Global Configuration mode:
awplus(config)# do show interface port1.0.4
This example pings a network device:
awplus(config)# do ping 149.11.123.45