Allied Telesis AT-DC2552XS - Manual (Page 143)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section I: Switch Management 143
SHOW FILE SYSTEMS
Syntax
show file systems
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the specifications of the file system on the
switch. An example is shown in Figure 29.
Figure 29. SHOW FILE SYSTEMS Command
The fields are described in Table 20.
Size(b) Free(b) Type Flags Prefixes S/D/V Lcl/Ntwk Avail
-------------------------------------------------------------------
100.0M
68.1 flash rw flash: static local Y
Table 20. SHOW FILE SYSTEMS Command
Field Description
Size (B) Indicates the total memory size of the file system on
the switch. The amount is given in bytes.
Free (B) Indicates the amount of unused file system memory on
the switch. The amount is given in bytes.
Type Indicates the type of memory.
Flags Indicates the file setting options. The options are:
 rw: read and write
 ro: read only
Prefixes Not supported
S/D/V Indicates the memory type. The switch’s memory type
is static.