Allied Telesis AT-DC2552XS - Manual (Page 298)

Chapter 12: LACP Commands
298 Section II: Layer 2 Switching
Selected Displays the state of the port as an LACP
member port. The options are:
 SELECTED: Active port
 STANDBY
 UNSELECTED: Disabled
Partner System Displays the LACP system ID (MAC address)
of the partner device.
Oper Key Displays the LACP port key.
Oper Port Priority Displays the LACP port priority.
Individual Indicates the aggregation flag. The options
are:
 Yes- Individual: The port does not have
other ports to form an aggregation.
 No - Aggregatable: The port can form an
aggregation with other ports.
Synchronized Indicates the synchronization flag. The
options are:
 YES - IN_SYNC
 NO - OUT_OF_SYNC
Collecting Indicates the collecting flag. The options are:
 YES - Able to receive packets
 NO - Unable to receive packets
Distributing Indicates the distributing flag. The options
are:
 YES - Able to receive packets
 NO - Unable to receive packets
Defaulted Indicates the defaulted flag. The options are:
 YES - Using default values for the partner
device because the switch does not
receive any LACP packets.
 NO - Using values from LACP packets
Expired Indicates the expired flag. The options are:
 YES - The receive machine is expired.
 NO - The receive machine is not expired.
Table 52. SHOW PORT ETHERCHANNEL Command (Continued)
Field Description