Allied Telesis AT-DC2552XS - Manual (Page 173)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section I: Switch Management 173
The fields in the display are described below:
Table 25. SHOW LOG CONFIG Command
Field Description
Log Displays the log name or log destination. The options
are:
 Buffered log
 Permanent log
 Host and IP address
 Monitor log
 Console log
Status Displays whether the log output is enabled or
disabled.
Maximum size Displays the maximum size that the log can store log
messages and current usage. This field is only for
buffered and permanent logs.
Time offset Displays the difference in time settings between the
syslog server and the offset configured. The
difference in time is indicated by the plus (+) or minus
(-) number of hours. This field is only for the host
(syslog server).
Offset type Displays the setting of the standard time. The options
are:
 Local (the switch’s time zone)
 UTC
Filters Displays the setting of filtering criteria. The * indicates
the default setting.
Level Displays the message level severity.
Program Displays the name of a program that generates event
messages. The keyword “any” indicates all programs.
Msg text Displays the message text that filters event
messages. The keyword “any” indicates all
messages.
Statistics Displays the number of event messages that the
destination received, the number of output
messages, and the time that the last message was
sent.