Allied Telesis AT-DC2552XS - Manual (Page 49)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section I: Switch Management 49
NO LENGTH
Syntax
no length
Parameters
None
Mode
Console Line and Virtual Terminal Line modes
Description
Use this command to reset the maximum number of lines that the SHOW
commands display at once to the default value of 20 lines. You can apply
this setting to local and remote management sessions.
Confirmation Command
“SHOW SWITCH” on page 117
Examples
This example resets the maximum number of lines to display to the default
value, 20 lines, for local management sessions:
awplus> enable
awplus# configure terminal
awplus(config)# line console 0
awplus(config-line)# no length
This example resets the maximum number of lines to display to the default
value, 20 lines, for remote management sessions:
awplus> enable
awplus# configure terminal
awplus(config)# line vty 0 9
awplus(config-line)# no length