Allied Telesis AT-DC2552XS - Manual (Page 208)

Chapter 8: SNMP Commands
208 Section I: Switch Management
SNMP-SERVER HOST
Syntaxes
snmp-server host ipaddress traps version 1 community
snmp-server host ipaddress traps|informs version 2c
community
snmp-server host ipaddress traps|informs version 3
auth|priv|noauth user
Parameters
ipaddress
Specifies the IPv4 address of a recipient of an SNMP trap or inform
notification sent by the switch.
traps
Specifies the message type as traps. You can specify traps only
for SNMPv1.
informs
Specifies the message type as informs.
community
Specifies a SNMPv1 and SNMPv2c community string. The
community string must exist on the switch. This parameter is case-
sensitive. Specify this parameter only for SNMPv1 and SNMPv2c.
auth
Specifies the minimum security level for the host as authentication.
priv
Specifies the minimum security level for the host as privacy.
Privacy means authentication with encryption.
noauth
Specifies the minimum security level for the host as no
authentication.
user
Specifies the name of an SNMPv3 user. The name is case-
sensitive.
Mode
Global Configuration mode