Allied Telesis AT-DC2552XS - Manual (Page 210)

Chapter 8: SNMP Commands
210 Section I: Switch Management
SNMP-SERVER LOCATION
Syntax
snmp-server location text
Parameter
text
Specifies the value of the MIB object sysLocation. The maximum
length is 255 alphanumeric characters. Special characters are
permitted with the exception of exclamation marks (!) and question
marks (?).
Mode
Global Configuration mode
Description
Use this command to set the value of the MIB object sysLocation. This
value indicates the physical location of the system.
Confirmation Command
“SHOW SYSTEM” on page 119
Example
This example sets the value of the MIB object sysLocation to “San Jose
2F”:
awplus> enable
awplus# configure terminal
awplus(config)# snmp-server location San Jose 2F