Match eth-format protocol – Allied Telesis AT-DC2552XS User Manual
Page 493

AT-DC2552SX Switch Command Line Interface User’s Guide
Section V: Security and Traffic Control
493
MATCH ETH-FORMAT PROTOCOL
Syntax
match eth-format
format
protocol
type
Parameters
format
Specifies the Ethernet frame format. The options are listed in
Table 77.
.
type
Specifies the number of the Layer 3 protocol in hexadecimal. You
can also specify a pre-defined keyword. The pre-defined keywords
are listed in Table 78 on page 494.
Table 77. MATCH ETH-FORMAT PROTOCOL Command
FORMAT KEYWORDS
Keyword
Description
ethii-any
Ethernet Version 2 with tagged or
untagged VLAN
ethii-untagged
Ethernet Version 2 with untagged
VLAN
ethii-tagged
Ethernet Version 2 with tagged
VLAN
802dot2-untagged
802.2 LLC with untagged VLAN
802dot2-tagged
802.2 LLC with tagged VLAN
netwareraw-untagged
Novell 802.3 raw with untagged
VLAN
netwareraw-tagged
Novell 802.3 raw with tagged
VLAN
snap-untagged
802.2 LLC + SNAP with untagged
VLAN
snap-tagged
802.2 LLC + SNAP with tagged
VLAN