Allied Telesis AT-DC2552XS - Manual (Page 398)

Chapter 16: RRP Snooping Commands
398 Section II: Layer 2 Switching
IP RRP SNOOPING
Syntax
ip rrp snooping
Parameters
None
Mode
Global Configuration mode
Description
Use this command to enable the RRP Snooping feature. You cannot
enable RRP Snooping and a Spanning Tree Protocol, STP, RSTP, or
MSTP, at the same time. When enabling RRP Snooping, disable the
Spanning Tree Protocol using the NO SPANNING-TREE ENABLE
command. See “SPANNING-TREE ENABLE” on page 360.
To disable the RRP Snooping feature, use the NO IP RRP SNOOPING
command.
Confirmation Command
“SHOW IP RRP SNOOPING” on page 399
Example
This example enables the RRP Snooping feature on the switch:
awplus> enable
awplus# configure terminal
awplus(config)# ip rrp snooping