Allied Telesis AT-DC2552XS - Manual (Page 51)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section I: Switch Management 51
NO SERVICE PASSWORD-ENCRYPTION
Syntax
no service password-encryption
Parameters
None.
Mode
Global Configuration mode
Description
Use this command to disable password encryption. Passwords originally
defined in plain text are displayed in plain text in the running-config file.
However, encrypted passwords stay encrypted in the running-config file
even after this command is issued. Passwords originally entered in plain
text and then encrypted and saved in the startup-config file remain
encrypted.
Confirmation Command
“SHOW RUNNING-CONFIG” on page 116
Example
The following example disables password encryption:
awplus> enable
awplus# configure terminal
awplus(config)# no service password-encryption