Allied Telesis AT-DC2552XS - Manual (Page 289)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section II: Layer 2 Switching 289
The fields are described in Table 48.
Example
This example displays information about trunk groups as well as the LACP
trunk group with an ID number of 22:
awplus# show etherchannel 22
Table 48. SHOW ETHERCHANNEL Command
Field Description
LAG Maximum Indicates the maximum number of dynamic LACP
and static trunk groups that the switch can have.
LAG Static
Maximum Indicates the maximum number of static trunk
groups that the switch can generate.
LAG Dynamic
Maximum Indicates the maximum number of dynamic LACP
trunk groups that the switch can generate.
LAG Static Count Indicates the number of static trunk groups on the
switch.
LAG Dynamic
Count Indicates the number of dynamic LACP trunk
groups on the switch.
LAG Total Count Indicates the number of static and dynamic LACP
trunk groups on the switch.
LAG Aggregator Displays the ID number of an LACP trunk group.
Load-Balancing Displays the load balance settings of the LACP
trunk group. The options are:
 MACSrc: Source MAC address
 MACDest: Destination MAC address
 MACBoth: Source and Destination MAC
addresses
 IPSrc: Source IP address
 IPDest: Destination IP address
 IPBoth: Source and Destination IP addresses
Member Lists the member ports of the LACP trunk group.