Allied Telesis AT-DC2552XS - Manual (Page 290)

Chapter 12: LACP Commands
290 Section II: Layer 2 Switching
SHOW ETHERCHANNEL DETAIL
Syntax
show etherchannel detail
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display detailed information about the LACP trunk
groups on the switch. See Figure 52 for an example of the output.
Figure 52. SHOW ETHERCHANNEL DETAIL Command
Aggregator # 2..... po2
Mac address: (00-E0-0C-02-01-FD,FF0D)
Admin Key: 0xff0d - Oper Key: 0x0d0d
Receive link count: 2 - Transmit link count: 2
Individual: 0 - Ready: 0
Distribution Mode .. MACBoth
Partner LAG: (8000,00-15-77-FF-00-02,FF0D)
Link: Port 1.0.13 sync
Link: Port 1.0.14 sync
Aggregator # 1..... po1
Mac address: (00-E0-0C-02-01-FD,FF19)
Admin Key: 0xff19 - Oper Key: 0x1919
Receive link count: 1 - Transmit link count: 1
Individual: 0 - Ready: 0
Distribution Mode .. MACBoth
Partner LAG: (8000,00-15-77-FF-00-02,FF19)
Link: Port 1.0.25disabled
Link: Port 1.0.26 sync
Link: Port 1.0.27 disabled
Link: Port 1.0.28 disabled