Allied Telesis AT-DC2552XS - Manual (Page 255)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section II: Layer 2 Switching 255
NO STORM-CONTROL
Syntax
no storm-control broadcast|multicast|dlf
Parameters
broadcast
Specifies broadcast packets.
multicast
Specifies multicast packets.
dlf
Specifies unknown unicast packets.
Description
Use this command to remove packet threshold levels that were set on the
ports with the STORM-CONTROL command. See “STORM-CONTROL”
on page 278.
Confirmation Command
“SHOW STORM-CONTROL” on page 275
Examples
This example removes the threshold limit for broadcast packets on port
1.0.12:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.12
awplus(config-if)# no storm-control broadcast
This example removes the threshold limit for unknown unicast rate on port
1.0.5:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.5
awplus(config-if)# no storm-control dlf