Allied Telesis AT-DC2552XS - Manual (Page 172)

Chapter 7: Event Log Commands
172 Section I: Switch Management
SHOW LOG CONFIG
Syntax
show log config
Parameters
None
Modes
Privileged Exec mode
Description
Use this command to display the configurations of event logs. See
Figure 33 for an example of the information the command displays.
Figure 33. SHOW LOG CONFIG Command
Buffered log:
Status ....... enabled
Maximum size.. 50kb (7.3kb in use)
Filters:
* 1 Level...... informational (6)
Program.... any
Msg text... any
Statistics.... 106 messages received, 82 accepted by filter
(2012 Aug 25 05:01:14)
Permanent log:
Status ....... enabled
Maximum size.. 50kb (3.2kb in use)
Filters:
* 1 Level...... warning (4)
Program.... any
Msg text... any
Statistics.... 106 messages received, 1 accepted by filter
(2012 Aug 25 05:01:14)
Host 172.17.28.186:
Time offset .. +00:00
Offset type... Local
Filters:
* 1 Level...... any
Program.... any
Msg text... any
Statistics.... 3 messages received, 3accepted by filter
(2012 Aug 25 05:01:14)