Allied Telesis AT-DC2552XS - Manual (Page 286)

Chapter 12: LACP Commands
286 Section II: Layer 2 Switching
PORT-CHANNEL LOAD-BALANCE
Syntax
port-channel load-balance src-mac|dst-mac|src-dst-mac|
src-ip|dst-ip|src-dst-ip
Parameters
src-mac
Specifies source MAC address as the load distribution method.
dst-mac
Specifies destination MAC address.
src-dst-mac
Specifies both the source address and the destination MAC
address.
src-ip
Specifies source IP address.
dst-ip
Specifies destination IP address.
src-dst-ip
Specifies both the source address and the destination IP address.
Mode
Port Interface mode
Description
Use this command to set the load distribution methods of a trunk group. A
trunk group can have only one load distribution method.
This command can be applied only to dynamic LACP and static trunk
groups. To enter the Port Interface mode for a specific trunk group, enter
the INTERFACE command with the ID number of the trunk group.
Confirmation Command
“SHOW ETHERCHANNEL DETAIL” on page 290