Lenze E94AYCEP - Manual (Page 118)

11 Parameter reference
11.3 Parameters of the communication module for slot MXI2
119
Lenze · E94AYCEP communication module (POWERLINK MN/CN) · Communication Manual · DMS 6.0 EN · 02/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C14132
C14136
C14203
C14205
Parameter | Name:
C14132 | EPL CN: Link interruptions
Data type: UNSIGNED_32
Index: 10443 = 0x28CB
EPL index: 0x1C10
The code indicates the counter of the Controlled Node for POWERLINK connection interruptions ( C14118 ).
Each event is counted. Every single event is followed by an error message. No threshold value management is
implemented.
Display area
(min. value | unit | max. value)
0 4294967295
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Parameter | Name:
C14136 | EPL telegram counter
Data type: UNSIGNED_32
Index: 10439 = 0x28C7
EPL index: 0x1101.0x01
The subcodes of the code indicate a counter for EPL cycles. The counter is started with each mains power-up of the
EPL node at 0. An overflow occurs at 4.294.967.295.
Display area
(min. value | unit | max. value)
0 4294967295
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Parameter | Name:
C14203 | EPL CN response error
Data type: UNSIGNED_32
Index: 10372 = 0x2884
EPL index: See subcodes
The subcodes of the code indicate Controlled Node-specific cumulative counters for missing PRes frames. The
behaviour corresponds to a node The behaviour corresponds to subcode 1 of the single error counters.
Each subcode corresponds to an EPL node with node ID = subcode number.
Display area
(min. value | unit | max. value)
0 4294967295
Subcodes Info EPL index
C14203/1 Managing Node 0x1C07.0xF0
C14203/2 Diagnostics device 0x1C07.0xFD
C14203/3 router 0x1C07.0xFE
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Parameter | Name:
C14205 | EPL CN response error: Monit. thresholds
Data type: UNSIGNED_32
Index: 10370 = 0x2882
EPL index: See subcodes
Setting range (min. value | unit | max. value)
0 1000
Subcodes Lenze setting Info EPL index
C14205/1 0 Managing Node 0x1C09.0xF0
C14205/2 0 Diagnostics device 0x1C09.0xFD
C14205/3 9 router 0x1C09.0xFE
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT