Lenze E94AYCEP - Manual (Page 70)

11 Parameter reference
11.2 Parameters of the communication module for slot MXI1
71
Lenze · E94AYCEP communication module (POWERLINK MN/CN) · Communication Manual · DMS 6.0 EN · 02/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
11.2 Parameters of the communication module for slot MXI1
This chapter lists the parameters of the E94AYCEP communication module (POWERLINK) for slot
MXI2 of the Servo Drive 9400 in numerically ascending order.
C13000
C13001
Parameter | Name:
C13000 | EPL IP address
Data type: UNSIGNED_32
Index: 11575 = 0x2D37
EPL index: See subcodes
The code displays the IP address of the communication module.
• The IP address is derived from the EPL node address (Node ID): 192.168.100.[Node ID]
• The node ID is derived from the DIP switch position or from C13044 .
 Node address setting ( 36)
Setting range (min. value | unit | max. value)
0.0.0.0
(0x00000000)
255.255.255.255
(0xFFFFFFFF)
Subcodes Lenze setting Info EPL index
C13000/1 3232261130
(0xC0A86401 = 192.168.100.1)
EPL IP address 0x1E40.0x02
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Parameter | Name:
C13001 | EPL IP subnet mask
Data type: UNSIGNED_32
Index: 11574 = 0x2D36
EPL index: See subcodes
The code declares the IP subnet mask which restricts the directly addressable IP address range (i.e. without a
gateway in the EPL segment of the routers). The value 255.255.255.0 (0xFFFFFF00) is always assigned to the subnet
mask in one segment.
Setting range
(min. value | unit | max. value)
255.0.0.0
(0xFF000000)
255.255.255.0
(0xFFFFFF00)
Subcodes Lenze setting Info EPL index
C13001/1 4294967040
(0xFFFFFF00 = 255.255.255.0)
EPL IP-subnet mask 0x1E40.0x03
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT