Lenze E94AYCEP - Manual (Page 43)

Lenze · E94AYCEP communication module (POWERLINK MN/CN) · Communication Manual · DMS 6.0 EN · 02/2014 · TD17
44
7 Process data transfer
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Port mapping in the »Engineer«
The port mapping in the »Engineer« can be automatically carried out via a selectable interface:
• POWERLINK MN/CN
• CAN on board
• Defined by the system

How to select the interface for automatic assignment of the port mapping:
1. Go to Process data objects tab and press the "Go to application" button.
2. Go to Ports tab of the application, press the "Interface for automatic allocation ..." button
and select the desired interface.