2 monitoring functions of the controlled node, Monitoring functions of the controlled node, 8monitoring – Lenze E94AYCEP User Manual
Page 47
Advertising
Lenze · E94AYCEP communication module (POWERLINK MN/CN) · Communication Manual · DMS 6.0 EN · 02/2014 · TD17
48
8
Monitoring
8.2
Monitoring functions of the Controlled Node
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.2
Monitoring functions of the Controlled Node
In order to change the standard settings of the monitoring functions, press the
"Open advanced
settings" button.
• The input fields for monitoring thresholds and monitoring responses are shown.
• The
"Close advanced settings" serves to mask out the input fields again.
Note!
The E94AYCEP communication module as Controlled Node only supports monitoring for
the "LeaveDataExchange" status.
Advertising