Lenze E94AYCEP - Manual (Page 65)

Lenze · E94AYCEP communication module (POWERLINK MN/CN) · Communication Manual · DMS 6.0 EN · 02/2014 · TD17
66
10 Error messages
10.1 Error messages of the communication module
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
EPL: MN address assigned double [0x00c88283]
EPL: Internal error [0x00c88284]
Response (Lenze setting printed in bold) Setting: not possible
 No reaction  System fault  Fault  Trouble  Quick stop by trouble  WarningLocked  Warning  Information
Cause Remedy
The address setting of the Managing Node has been
assigned several times (node ID = ’240’).
This node is configured as Managing Node but does not
participate in the frame traffic due to double addressing.
Correct address setting.
 Node address setting ( 36)
Response (Lenze setting printed in bold) Setting: not possible
 No reaction  System fault  Fault  Trouble  Quick stop by trouble  WarningLocked  Warning  Information
Cause Remedy
Internal error. Send communication module together with a
description of the fault to Lenze.