Rockwell Automation 1791ES-IB16 Guard I/O EtherNet/IP Safety Modules - Manual (Page 30)

30 Rockwell Automation Publication 1791ES-UM001D-EN-P - May 2013
Chapter 2 Understand the Operation of Safety Functions
• EtherNet/IP Conformance
• EtherNet/IP Safety Conformance
Europe
In Europe, the modules are subject to the European Union (EU) Machinery
Directive Annex IV, B, Safety Components, items 1 and 2. The type approval of
TUV-Rheinland addresses compliance to applicable requirements of the
following directives and standards:
• EU legislation
– Machinery Directive 98/37/EC
– Low-voltage Directive 73/23/EEC
– EMC Directive 89/336/EEC
• European standards
– EN 61508 (SIL1-3)
– EN 954-1 (Category 4, 3, 2, 1, B)
– EN 61131-2
– EN 418
– EN 60204-1
– IEC 61000-6-2
– IEC 61000-6-4
North America
In North America, the TUV-Rheinland type approval includes Guard I/O
compliance to the relevant standards and related information including the
following:
• U.S. standards - ANSI RIA15.06, ANSI B11.19, NFPA 79
• The modules are UL-certified functionally safe and carry the NRGF label,
when product is marked.
• The modules received UL Listing to standards of U.S. and Canada
including the following, when product is marked.
Japan
In Japan, type test requirements are provided in Article 44 of the Industrial Safety
and Health Law. These requirements apply to complete systems and cannot be
applied to a module by itself. Accordingly, to use the module in Japan as a safety
device for press machine or shearing tool pursuant to Article 42 of the above-
mentioned law, it is necessary to apply for testing of the entire system.