Rockwell Automation 1791ES-IB16 Guard I/O EtherNet/IP Safety Modules - Manual (Page 47)

Rockwell Automation Publication 1791ES-UM001D-EN-P - May 2013 47
Chapter
5
Configure the I/O Modules by Using the Logix
Designer Application
Use Help At the bottom of a dialog box, choose Help for information about how to
complete entries in the dialog box. At the bottom of a warning dialog box, choose
Help to get information about that specific error.
Add Modules to the I/O
Configuration Tree To add a module to the I/O configuration tree, follow these guidelines.
Topic Page
Use Help 47
Add Modules to the I/O Configuration Tree 47
Use the Module Properties and General Dialogs 49
Work with the Safety Dialog 60
Work with the Input Configuration Dialog 62
Work with Test Output Configuration Dialog 62
Work with the Output Configuration Dialog 63
Save and Download the Module Configuration 65