Rockwell Automation 1791ES-IB16 Guard I/O EtherNet/IP Safety Modules - Manual (Page 52)

52 Rockwell Automation Publication 1791ES-UM001D-EN-P - May 2013
Chapter 5 Configure the I/O Modules by Using the Logix Designer Application
• Point Status-Muting - A muting status tag for test output T3/T7 with
point status for each input and output point
• Combined Status-Muting
– A single BOOL tag represents an AND of the status bits for all the
input points. For example, if any input channel has a fault, this bit goes
LO.
(1)
– A single BOOL tag represents an AND of the status bits for all the
output points.
(1)
– A muting status tag for test output T3/T7
(1) When using combined status, use explicit messaging to read individual point status for diagnostic purposes.