Rockwell Automation 1791ES-IB16 Guard I/O EtherNet/IP Safety Modules - Manual (Page 49)

Rockwell Automation Publication 1791ES-UM001D-EN-P - May 2013 49
Configure the I/O Modules by Using the Logix Designer Application Chapter 5
2. From the Select Module dialog box, choose the + next to Safety to see a list
of safety modules
3. From the Select Module dialog box, choose the appropriate module, such
as 1791ES-IB16, and OK at the bottom of the dialog box.
Use the Module Properties
and General Dialogs To use the Module Properties and General dialogs to configure a module, follow
these guidelines.
1. From the I/O configuration tree, double-click the module, such as the
1791ES-IB8XOBV4 module, to see the Module Properties dialog box.
2. From the Module Properties dialog box, complete entries for the General
dialog box.
a. For Name, type a unique name.
b. For IP Address, enter the IP address of the Guard I/O module.
A list of safety modules
appears here.