Rockwell Automation 1791ES-IB16 Guard I/O EtherNet/IP Safety Modules - Manual (Page 53)

Rockwell Automation Publication 1791ES-UM001D-EN-P - May 2013 53
Configure the I/O Modules by Using the Logix Designer Application Chapter 5
.
Output Data Options
Choose from these options.
• None - Selecting None results in an input only connection to the module.
Inputs and status are read, but no outputs are written.
• Safety - Selecting Safety creates these safety tags and enables these outputs
for use in the safety task.
IMPORTANT The standard outputs on the module must not be used for safety purposes.