Cable diagnostics, Advanced software features, Cable diagnostics advanced software features – Rockwell Automation 1783-BMxxx Stratix 5700 Ethernet Managed Switches User Manual User Manual
Page 115
Rockwell Automation Publication 1783-UM004E-EN-P - June 2014
115
Switch Software Features Chapter 3
• SNMPv3
• HTTPS
Cable Diagnostics
The Cable Diagnostics feature lets you run a test on each switch port to
determine the integrity of the cable connected to the RJ45 (copper) ports. This
feature is not available for fiber ports.
The test determines the distance to the break from the switch for each cable with
a plus or minus error value individually listed.
Advanced Software Features
More advanced software features are available, some of which are configured by
the global macro or Smartports for typical automation applications described in
this manual.
For information about how to configure features not available in the Device
Manager Web interface or the Logix Designer application, see the following:
• Cisco IE2000 Switch Software Configuration Manual available at
.
• Cisco IE2000 Switch Command-Line Interface Manual available at
.