Rockwell Automation 1783-BMxxx Stratix 5700 Ethernet Managed Switches User Manual - Manual (Page 141)

Rockwell Automation Publication 1783-UM004E-EN-P - June 2014 141
Manage the Switch via the Device Manager Web Interface Chapter 4
To assign, modify, or delete a switch port IP address, click the DHCP Persistence
tab.
Configure VLANs To create, modify, and delete VLANs, from the Configure menu, choose
VLAN Management.
The default VLAN ID is 1 and the name for the management VLAN is default.
The default VLAN alone can be sufficient based on the size and requirements of
your network. We recommend that you determine your VLAN needs before
creating VLANs.
To create a VLAN, you must give the VLAN a name and a unique ID number.
You can modify the name of a VLAN but not its number. You cannot modify or
delete the default VLAN.
After creating VLANs, you can then assign ports to VLANs. Before assigning
ports to VLANs, make sure that each port has the appropriate port role.
Table 14 - DHCP Persistence Fields
Field Description
Interface The number of the switch port, including port type (such as Fa for Fast Ethernet and Gi for Gigabit Ethernet), and the specific port
number. For example, Fa1/1 is Fast Ethernet port 1 on the switch.
Pool Name The name of the DHCP IP address pool configured on the switch.
IP Address The IP address assigned to the switch port. The IP address that you assign is reserved for the selected port and is not available for normal
DHCP dynamic assignment. The IP address must be an address from the pool specified in the DHCP Pool Name field.