Rockwell Automation 1783-BMxxx Stratix 5700 Ethernet Managed Switches User Manual User Manual
Page 220
220
Rockwell Automation Publication 1783-UM004E-EN-P - June 2014
Chapter 5 Manage the Switch via the Studio 5000 Environment
6. Click OK.
7. Complete the Gateway Translation fields to enable devices on the public
subnet to communicate with devices on the private subnet:
• Public—Type the default gateway address of the Layer 3 switch or
router connected to the switch’s uplink port.
• Private—Type a unique IP address to represent the Layer 3 switch or
router on the private network.
8. To configure traffic permits and packet fixups, proceed to
Traffic Permits and Fixups on page 228
9. Click Set.
Create NAT Instances for Traffic Routed through a Layer 2 Switch
To create a NAT instance for traffic routed through a Layer 2 switch, follow these
steps.
1. From the NAT tab, click New Instance to display the NAT Instance
dialog box.