Rockwell Automation 1783-BMxxx Stratix 5700 Ethernet Managed Switches User Manual - Manual (Page 195)

Rockwell Automation Publication 1783-UM004E-EN-P - June 2014 195
Manage the Switch via the Studio 5000 Environment Chapter 5
Connection Properties You can define connection properties for the switch on the Connection tab.
Table 28 - Connection Tab Fields
Field Description
Requested Packet Interval (RPI) Enter a value between 300…5000.
Inhibit Module Check to disable communication between the controller and the switch. Clear the checkbox to restore
communication.
Major Fault on Controller If Connection Fails While in Run mode Check to have the controller create a major fault if connection fails in Run mode.
Use Unicast Connections over EtherNet/IP Check to use Unicast connections with the EtherNet/IP network.
Module Fault Displays the fault code returned from the controller (related to the switch you are configuring), and the text
detailing the module fault has occurred.