Rockwell Automation 1783-BMxxx Stratix 5700 Ethernet Managed Switches User Manual - Manual (Page 185)

Rockwell Automation Publication 1783-UM004E-EN-P - June 2014 185
Manage the Switch via the Device Manager Web Interface Chapter 4
Table 26 - Auto Sync Tab Fields
Field Description
Configuration Auto Sync—Automatically synchronize the configuration when a configuration change is
made in the Device Manager Web interface.
This is the default configuration.
Prompt to Sync—After a user has submitted a configuration change, the user is prompted
with a message asking to confirm the synchronization.
Manual Sync—No synchronization occurs on a configuration change unless the user
performs a sync manually.
Image (IOS) Auto Sync (After firmware upgrade)—Automatically sync the changed configuration when
firmware is upgraded.
Prompt to Sync (After upgrade)—After firmware is upgraded, the user is prompted with a
message asking to confirm the configuration.
This is the default configuration.
Manual Sync—No synchronization occurs after firmware is upgraded unless the user
performs a sync manually.