Rockwell Automation 1783-BMxxx Stratix 5700 Ethernet Managed Switches User Manual - Manual (Page 29)

Rockwell Automation Publication 1783-UM004E-EN-P - June 2014 29
Chapter
2
Switch Installation
Topic Page
Stratix 5700 Switch Installation 30
Installation Guidelines 31
Install or Remove the SD Card (optional) 33
Verify Switch Operation 34
Mount the Switch on a DIN Rail 36
Remove the Switch from the DIN Rail 38
Ground the Switch 38
Wire the Switch DC Power Source 40
Attach the Switch Power Connectors 43
Wire the Power over Ethernet DC Power Source 44
Attach the PoE Power Connector 46
Install an SFP Module (optional) 46
Remove SFP Modules from SFP Module Slots 48
Wire the External Alarms 49
Attach the Alarm Relay Connector to the Switch 52
Connect to 10/100 and 10/100/1000 Ports 52
Connect to 10BASE-T, 100BASE-TX, or 1000BASE-T Ports 53
Connect to PoE Ports 54
Connect to SFP Modules 55
Connect to a Dual-purpose Port 56
ArmorStratix 5700 Switch Installation 57
Installation Guidelines 57
Install or Remove the SD Card (optional) 59
Verify Switch Operation 60
Mount the Switch 61
Ground the Switch 62
Connect the Switch to a DC Power Source 64
Wire External Alarms 65
Connect to 10/100 and 10/100/1000 Ports 66
Connect to PoE Ports 66
Set Up the Switch Initially with Express Setup 67