Rockwell Automation 1783-BMxxx Stratix 5700 Ethernet Managed Switches User Manual - Manual (Page 276)

276 Rockwell Automation Publication 1783-UM004E-EN-P - June 2014
Appendix C Cables and Connectors
Figure 15 - Two Twisted-pair Crossover Cable Schematic
Figure 16 - Four Twisted-pair Crossover Cable Schematic
Dual-purpose Ports
(combo ports) The Ethernet port on a dual-purpose port uses standard RJ45 connectors. The
following figure shows the pinouts.
Figure 17 - Ethernet Port RJ45 Connector
The SFP module slot on a dual-purpose port uses SFP modules for fiber-optic
ports.
Switch
3 TD+
6 TD–
1 RD+
2 RD–
Switch
3 TD+
6 TD–
1 RD+
2 RD–
H5579
1 TPO+
2 TPO-
3 TP1+
6 TP1-
1 TP0+
Switch Switch
2 TP0-
3 TP1+
6 TP1-
4 TP2+
5 TP2-
7 TP3+
8 TP3-
4 TP2+
5 TP2-
7 TP3+
8 TP3-
IMPORTANT The auto-MDIX feature is enabled by default. For configuration information for
this feature, see the switch software configuration guide or the switch
command reference.
2 3 1 4 5 6 7 8 Pin Label
1
2
3
4
5
6
7
8
TP0+
TP0-
TP1+
TP2+
TP2-
TP1-
TP3+
TP3-