Dhcp address assignment – Rockwell Automation 1783-BMxxx Stratix 5700 Ethernet Managed Switches User Manual User Manual

Page 212

Advertising
background image

212

Rockwell Automation Publication 1783-UM004E-EN-P - June 2014

Chapter 5 Manage the Switch via the Studio 5000 Environment

DHCP Address Assignment

You can view and configure DHCP persistence from the DHCP Address
Assignment tab. With DHCP persistence, you can assign a specific IP address to
each port, so that the device attached to a specific port receives the same IP
address.

TIP

The information on this tab is not displayed if you are offline.

Table 41 - DHCP Address Assignment Tab Fields

Field

Description

Port

Displays the ports available for the configuration. The port number includes the port type (Fa for Fast Ethernet and Gi for Gigabit Ethernet), the
switch number (1), and the specific port number.
EXAMPLE:
Gi1/1 is Gigabit Ethernet port 1.
Fa1/1 is Fast Ethernet port 1.

Pool

Displays the pool names from the DHCP IP address pool that corresponds to the instances available in the switch.
If you delete all of the rows containing pools on the DHCP Pool Display tab on the Module Properties dialog box and click Refresh, the Pool field is
blank.

The Pool field is available when the switch is online and appears dimmed when the switch is offline.

IP Address

Displays the IP address assigned to the switch port. The format is a 32-bit numeric address written as four numbers separated by periods (for
example, 255.255.255.255). Each number can be from 0…255.
IP Address is available only when the switch is online and dimmed when the switch is offline.

Refresh

Click to refresh the grid control with new data obtained directly from the switch. From the keyboard, press Alt-R.
If you have changed a value in the grid and clicked Refresh before clicking Set, all values in the grid are returned to their previously set values.

The Refresh button is available only when the switch is online. The Refresh button is dimmed when the switch is offline.

Set

Click to apply changes on this dialog box to the switch. The Enter Password dialog box can appear.

Advertising