Port security – Rockwell Automation 1783-BMxxx Stratix 5700 Ethernet Managed Switches User Manual User Manual
Page 206
206
Rockwell Automation Publication 1783-UM004E-EN-P - June 2014
Chapter 5 Manage the Switch via the Studio 5000 Environment
Port Security
The Port Security feature applies only to Full firmware. For more information,
see
Table 36 - Port Security Tab Fields
Field
Description
Port
The port on which you want to enable or disable security.
Enable
Check the checkbox to enable port security.
MAC Addresses
The number of supported dynamic or static MAC addresses.
• Allowed—1…80.
• Dynamic—The number of MAC addresses (devices) currently connected to the port that are not manually (statically) defined.
• Static—The number of MAC addresses (devices) statically defined by using the Device Manager Web interface.
Note that this number must be greater than the sum of the static + dynamic for a given port. If you wish to set the number to less,
disconnect the appropriate devices and let their entries in the port security table time out.