Rockwell Automation 2090 Ultra3000 Servo Drives Integration Manual User Manual

Page 151

Advertising
background image

Publication 2098-IN005C-EN-P — March 2008

Minimizing the Effects of Feedback Signal Loss

151

3. Click OK.

4. Click the Scale Type default value and select Auto.

5. Click the Run Continuous trigger setting and observe the main

dialog.

The Position Error signal of the running system is displayed. It is
likely that the signal is highly dynamic, and the auto-scaling
feature of Ultraware automatically adjusts the dialog scaling to fit
the signal for every sampling and trigger instance.

6. Click the Scale Type value and select Auto.

7. Click Run Continuous and observe the main oscilloscope window.

The Position Error signal of the running system is displayed. It is
likely that this signal is highly dynamic, and the auto-scaling
feature of Ultraware software automatically adjusts the
oscilloscope window vertical scale to fit the entire signal
waveform for every sampling instance.

8. If a fixed scale is desired, Click the Scale Type value again and

select Manual.

The Scale and Offset fields appear.

Advertising
This manual is related to the following products: