Rockwell Automation 2090 Ultra3000 Servo Drives Integration Manual User Manual
Page 77
Advertising
Publication 2098-IN005C-EN-P — March 2008
Commissioning Your Ultra3000 Drive
77
The New Tag dialog opens.
8. Configure the new tag.
a. In the Name box, enter your module name.
b. In the Data Type pull-down menu, choose
AXIS_SERVO_DRIVE.
9. Click OK.
The axis appears under the Ungrouped Axes folder in the
Explorer dialog.
10. From the Node 1 pull-down menu, choose the node address for
your axis.
11. Click OK.
Advertising
This manual is related to the following products: